Desulfurization tower is now more and more well known. Although there are many kinds of desulfurization tower equipment, the root cause is to purify and treat industrial flue gas and improve environmental pollution. Biological desulfurization tower is a newly emerging one. Maybe you are not particularly familiar with it. Now let the manufacturers of biological desulfurization equipment tell us its specific operation method.
Understand the common problems of biological desulfurization tower operation method, first of all, we must understand the switch requirements of the equipment. First, when we start work, we start the pump first, so that the jet pressure atomizing nozzle in the equipment can spray into the cylinder, so that the hot smoke can enter the cylinder. But when it stops working, hot smoke must not be allowed into the cylinder before the pump can be shut down.
In addition, the following points should also be noted:
1. after the dust removal and desulfurization tower is put into operation, the pump should not be closed, so that it can be sprayed all the time.
2. There is a large amount of smoke and dust settled in the pool when using the desulfurization tower. Therefore, to keep the pool water clean, there should be no plastic sheets, oranges, etc. to prevent blocking the nozzle (dust will not block the nozzle).
3. Sulfur dioxide and nitrogen oxides in flue gas combine with water to form acidity. Acidic water not only affects the effect of desulfurization tower, but also affects the service life of equipment pipes and pools. Therefore, alkali should be added to keep the acidity and alkali in the pool above 10 PH value.
That's all for this issue. To learn more about biological desulfurization, please collect our website: Biogas desulfurization and purification http://www.jfshop.net/old